Different chargers allow you to demonstrate different battery%s. Some devices don’t support this; they only use a specific percentage of battery. When selecting a device for use with Ampere, users should review the full list of compatible and incompatible phones to pick the best option. Many devices don't contain a chip that would allow them to interface with Ampere, even though the interfaces appear to be compatible.

People incorrectly believe this app provides accurate milliamperes. In fact, it only considers the charging cable or USB port to determine the most suitable option. Using this compatibility gives you a positive experience with the same device. It helps people save time and resources by allowing them to operate without any issues.

Ampere’s massive utility is easily appreciated thanks to its well-thought-out design. Everything has been streamlined so users don’t need to tediously adjust settings. By default, most functionality is already in place, allowing users to gather information with minimal effort. When launching the program for the first time, wait about ten seconds before the application captures all of the information requested. During this time, you may observe a charging or discharging current. It's crucial to know that cables can affect the differences between people. USB, AC and even wireless chargers can be charged through. The USB cable can't be ignored either, as it’s one of many factors that make the differences among people.

Mobile devices help to consume more energy by allowing current to be absorbed. Additionally, many different desktop apps and games don’t help; they’re just part of this energy-consuming war. Net and GPS information impacts the brightness on the display, but you likely don’t care. Ampere explains how this works and how it has a substantial effect. In addition to that, current flows through any device when they have the GPS or Wi-Fi turned on. When your phone isn’t charging, Ampere reveals details. And since a discharged current indicates your phone is not charging, this is a useful way to gather information. However, the charger’s current does serve your phone as it charges. And when fully charged, the energy shuttling between battery and charger will eventually deplete the phone’s battery. While charging or connecting to a USB cable, measure the amount of electricity drawn and released by the mobile device. Results can vary based on the brightness and charge rate of a mobile device; as well as the type of charger used. The phone doesn’t charge fully due to our incomplete use of time. Lollipop devices can use the older single-interface system approach if they have only one system. It alerts people with its intelligent system.

Many mobile apps require users to determine the full capabilities of the app when they first launch it. This is because the app’s manufacturer recommends that Ampere is used to measure battery charge and discharge for charging and discharging batteries. This makes it easy for users to accurately measure cable input and output with the batteries. Finding the right device to charge your phone is easy with this information. You also find out what type of power source your phone uses. This helps with many other problems since you know the answer to them. Various objects that connect the power source to the charger and USB cord can be identified. Additionally, the status of a phone's battery can be assessed and documented as accurately as possible.

Can users easily understand the purpose of an application after understanding how it functions? Before using an application, users must log in to the app. After logging in, the application will provide accurate results within 10 seconds. As long as a user follows these steps, they can use any app without question. When the Ampere app collects 30 values, it only displays the current rate in a given moment. Subsequently, its internal buffer can store up to 50 values. The top 10 and bottom 10 values of the overall average are selected, and these are displayed on the app's interface.

In order to fix errors that occur while using the application— such as error messages appearing on the screen— users need to first check their phone's current condition. Most commonly, this is when the application is running. If users encounter any issues, they should immediately close and restart Ampere. Irregular errors in the application can be resolved with this procedure. If that doesn't work, try removing and reconnecting the cord. To ensure that the problem is resolved, you should reboot the device. If that doesn't fix the problem, you can delete and re-load the app. If the user still doesn't feel better, it's best to suggest they power their phone off and then turn it on again.

Before considering Ampere's functionality, a user should consider the app's compatibility with their phone. Frequently asked questions come from users through their questions such as "Ampere is compatible with my phone?" This list details phones that the app won’t support. These include Samsung phones like the Galaxy Note2, Galaxy Tab4 7.0 and Galaxy S3; as well as HTC devices like the HTC One.t compatible will be: HTC Desire 510, HTC One S (Ville), X (Endeavoru), XL (Evita), HTC Sensation 4G.

Did you ever felt, that one Charger/USB cable set charges your device really fast and the other not? Now, you can prove this with Ampere.Measure the charging and discharging current of your battery. PRO features:
- Widgets
- Notification
- Alerts on device
- Alerts on Android WearThe app works on Android 4.0.3+ devices. Not every device is supported because there are devices which lacks an appropriate measurement chip (or the interface) and they can not be supported at all. Please read the list of not supported phones at the end of the description.The app is not meant to be mA accurate. It is only good for evaluate which Charger/USB cable combo is working the best for you on the same device.----Please read also the FAQ: http://goo.gl/R8XgXX ----Start the app and wait ca. 10 seconds ("measuring" is on the display). After this time, the charging or discharging current will be shown.The current depends on many things:
- Charger (USB/AC/Wireless)
- USB cable
- Phone type
- Current tasks running
- Display brightness
- WiFi state
- GPS statePlease don't use the readings on this app as concrete science. However, the readings are good enough to relatively measure how various chargers and USB cables fair on the same device.If the app shows 0mA all the time, please use the settings option "Old measurement method". You can force the app with it to use the old measurement interface, if the Lollipop device has at least one.Unfortunately some Samsung devices don't give correct (measured) values (e.g.: S5), just the maximum possible charging current with the actual USB cable/charger configuration. This is a firmware problem.----Background info: The app measures the charging/discharging current of the battery. If your phone is not connected to a charger, you see the discharging current which is negative. If you connect a charger then the current what the charger gives will be used to supply your phone and the remaining power will be charged into the battery.If your phone consumes 300 mA without a charger connected (-300mA on the display), then a 500 mA charger will charge your battery maximum with 200 mA current (200mA on display).----Technical info: The displayed current is an average value from 50 measurements minus the 10 upper values and the 10 lower values. The displayed current can be shaky or unstable or even zero which means, that the Android system provides unstable values. Every company uses different battery types and other hardware making it difficult to get accurate results about your charger.----LiPo batteries don't draw the maximum for the full time it takes to charge the phone. If your battery is charged almost full then the charging current will be much less as by lower battery levels.- A graph explaining LiPo charge stages: http://batteryuniversity.com/_img/content/ion1.jpg
- Dave's (EEVBlog) LiPo Charging Tutorial: http://youtu.be/A6mKd5_-abk----Phones/ROMS compatible only with "Old measurement method" switched on and selected the right "Measurement interface":
➤ HTC One M7 / M8
➤ LG G3Phones/ROMS reported to be not working with this app:
➤ Galaxy Grand Prime - fortuna3gdtv
➤ Galaxy Note2 - t03g, t03gchn, t03gchnduos, t03gcmcc, t03gctc, t03gcuduos
➤ Galaxy S3 - d2att, d2spr, d2vmu
➤ Galaxy Tab4 7.0 - degas3g
➤ HTC Desire 510 - htc_a11ul8x26
➤ HTC One S (ville), X (endeavoru), XL (evita)
➤ HTC Sensation 4G - pyramidPlease do not give wrong rating, if your phone is one of the above. Not the app is wrong, but your phone does not support this kind of measurement yet.If the app doesn't work on your device with pre-Lollipop Android version, then please read the first and the second posts in this XDA developer forum thread: http://goo.gl/pZqJg8 . Please post your problem with screenshots in the XDA thread.Please read also the FAQ: http://goo.gl/R8XgXX

A department dedicated to handling devices.
Provide information about the charging aspects of the device.
Maximized usage.
Electrical power supply
The main reasons someone uses an application with a focus on the user are for tasks like making phone calls and taking notes.
Quickly accessing the program's features is explained in the app itself.
Paraphrasing issues when working with
Mobile devices that work with the app are required.

// Option A //

To download Ampere mod from HappyMod.com.
You need enable the option "Unknown Sources".
1. Click on the above link to download Ampere mod APK.
2. Save the file in your device Downloads folder.
3. Now tap on Install and wait for the installation to finish.
4. Once it is done, open the game and start playing it right away.

// Option B //

To download Ampere from HappyMod APP, you can follow this:
1. Open your browser and download the HappyMod APK file from HappyMod.com - the only official website of HappyMod.
2. Open Android Settings and go into Privacy or Security.
3. Tap the option to Allow Unknown Sources and enable it.
4. Go to your Android downloads and tap the APK file.
5. Follow the directions on the screen to install it.
6. Search Ampere in HappyMod App.